IPTV Receiver Box (ตัวรับ) อุปกรณ์สำหรับรับสัญญาณ  ทีวี, วิดีโอ, ดาวเทียม ,กล้องวงจรปิด ที่ถูกส่ง Streaming มาจาก ตัวส่งรุ่น PTA-8960 ผ่านอินเตอร์เน็ต หรือเน็ตเวิร์ค โดยสามารถดูภาพจากทีวีได้เลย โดยไม่ต้องใช้ PC

The net-TV Box has two parts: Encoding Transmitter Box and this secoding Receiver Box (Transmitter Box and Receiver Box in this QSG). The Receiver Box must be connected to the transmitter Box via the network (LAN or WAN) to enjoy programs.

Ready? Please refer to the following instructions to use net TV Box.

Locating Control and Ports

take a moment to identify the control and ports shown on the following

1. USB Port:

    DiSK: Connect a USB storage device for record or playback

    3.5G: Connect a 3.5G USB Modem to acess internet.

2. IR Receiver:

    Point remote control here.

3. Status Lights:

    Show the current status of the Receiver Box (→5).

4. DC5.5V:

    Power input connector, connected to the supplied power adaptor.

5. ETHERNET:

    Ethernet cable connector, connect to the internet equipment via the network cable.

6. AV-OUT:

    Video output port, connect it to the Video In port og the TV by the supplied AV-OUT cable.

7. RESET:

    Reset button, Press it for three seconds, the Box will reset to the default setting.

Hardware Installation

Please connect the Receiver Bax as the following diagram.

1. Connect USB Storage

If you want to record the programs or play recorded files, you should plug a USB storage device in the DISK port at the front panel of the Box.(You can skip the step if you don't need record)

2. Connect 3.5G Modem

Plug the 3.5G USB Modem into the 3.5G port, and set 3.5G as the network configulation of the Receiver Box, and then you can get to internet via the 3.5G wireless network.

The two USB ports on the Receiver Box have their respective use, so the USB devices must be plugged into the correct port to avoid the unavailable sittuation

3. Connect Video output

Use the supplied 4 in 1 AV cable to connect the terminal marked AV-OUT on the Box, then connect the other end of it to the supplied AV cable, then to the AV IN [VIDEO & L-AUDIO-R] of tour TV.

4. Connect to Your Network

Connect the Receiver Box's ETHERNET port to the corresponding port on your Modem or Router using the supplied Ethernet cable.

5. Connect power Source

Connect the power adaptor to the port labeled DC5.5V. Plug the power adapter into an electrical outlet.

[Note]Remember to place the step at last.